How to clean a coffee machine’s milk system
Wipe and purge the steam wand after each jug. For a milk tube and frother, follow your model’s daily cleaning routine after the last milk drink.

Clean an automatic milk tube after the last milk drink
Start the milk-cleaning programme after the last milk drink, if your model has one. If the instructions call for a cleaning vessel, move the tube from the milk to the vessel and add the specified dose of milk cleaner. Follow the rinse prompts and leave the vessel in place until the cycle finishes. For a model with removable milk parts and no cleaning cycle, wash those parts as its manual directs.
Remove and rinse the user-removable outlet parts shown in the manual. Milk can remain in the frother even when the outside of the tube looks clear. Reassemble the parts in the order shown, then clean the drip tray and coffee outlet. If a tube is split or residue remains in a part you cannot clean, leave milk drinks out of service until the part is cleaned or replaced.
Clean a steam wand immediately after each jug
Wipe the outside and tip with a clean, damp cloth reserved for the wand. Aim the wand into its designated purge area and follow the machine’s purge instructions. Keep your hands clear of the tip; hot water and steam can continue briefly after the control is released. A machine with automatic purging may require you to lower the wand first.
Discard steamed leftovers and chill the carton
Discard milk left in the steaming jug and wash the jug after use. Never pour steamed milk back into the carton or save it to reheat for the next drink.
Return only milk that has stayed cold to the fridge. Date the opened carton. Even UHT milk needs refrigeration at 4°C or below after opening. Use it within the period printed on the pack. If a countertop cooler supplies the machine, check its temperature with a thermometer. Discard milk if it has warmed up and you cannot establish how long it was out of refrigeration. Hong Kong guidance on opened UHT milk